Nikon D3200 Shutter Priority Mode – Photography Tips
Nikon D3200 Tutorial – Photography Tips
S: Shutter Priority Mode
S mode is the thing that we photographers commonly make reference to as Shutter Priority mode. Just as the name implies, it is the mode that prioritizes or places major increased exposure of the shutter speed above all other camera settings.
Just like with Program mode, Shutter Priority mode provides for us more freedom to manipulate certain facets of our photography. In this case, we have been talking about shutter speed. The selected shutter speed determines how much time you expose your camera’s sensor to light. The longer it remains open, the greater time your sensor needs to gather light. The shutter speed also, to a large degree, determines how sharp your photographs are. This is distinctive from the image being sharply in focus. One of the major influences about the sharpness of the image is just how sharp it really is based on camera shake and also the subject’s movement. Because a slower shutter speed ensures that light from the subject is striking the sensor to get a longer time frame, any movement by you or your subject will demonstrate up in your photos as blur.
A slow shutter speed is the term for leaving the shutter open for the long stretch of time-like 1/30 of your second or longer. A fast shutter speed implies that the shutter is open for a very short time frame-like 1/250 of your second or shorter.
When to work with Shutter Priority (S) Mode
1. When dealing with fast-moving subjects in places you want to freeze the action.
Even the fastest of subjects can be frozen with the right shutter speed.
2. When you wish to highlight movements in the subject with motion blur
3. When you wish to utilize a long exposure to acquire light spanning a long time
In this low-lit night scene, a long exposure was needed to capture the statue and its surroundings.
4. When you wish to produce the silky-looking water in a waterfall
As it is possible to see, the subject of your photo usually determines whether you will use Shutter Priority mode. It is important that you be able to visualize the consequence of using a particular shutter speed. The great thing about shooting with digital camera models is that you get instant feedback by viewing your shot around the LCD screen. But imagine if your subject won’t supply you with a do-over? Such is often the case when shooting sporting events. It’s nothing like you can go ask the quarterback to throw that touchdown pass again when your last shot was blurry coming from a slow shutter speed. This is why it’s crucial that you know what those speeds represent with regards to their capabilities to stop the action and deliver a blur-free shot.
|First, let’s examine the amount control you’ve got over the shutter speeds. The D3200 features a shutter speed range between 1/4000 of the second to provided that 30 seconds. With that much latitude, you need to have enough control to capture nearly every subject. The other thing to consider is that Shutter Priority mode is regarded as a “semiautomatic” mode. This means that you’re taking control over taking care of of the total exposure while the camera handles one other. In this instance, you’re controlling the shutter speed along with the camera is managing the aperture. This is important, since there will be times you want to make use of a particular shutter speed but your lens won’t have the ability to accommodate your request.|
For example, you could possibly encounter this concern when shooting in low-light situations: If you are shooting a fast-moving subject that can blur with a shutter speed slower than 1/125 of an second your lens’s largest aperture is f/3.5, you might find your aperture display blinks in the viewfinder and also the rear LCD panel will display “Subject is too dark.” This is your warning that there won’t be adequate light designed for the shot-due for the limitations in the lens-so your picture will be underexposed.
Another case where you might run into the same situation is when you happen to be shooting moving water. To get that seem to be of silky, flowing water, it’s usually necessary to train on a shutter speed of at least 1/15 of a second. If your waterfall is at full sunlight, you may get a message that reads “Subject is just too bright” as the lens you happen to be using only stops down to f/22 at its smallest opening. In this instance, you got it is warning you that you is going to be overexposing your image. There are workarounds of those problems, which we’ll discuss later (see Chapter 7), but it is crucial that you know that there may be limitations when utilizing Shutter Priority mode.
Setting up and shooting in Shutter Priority mode
- Turn you guessed it-your camera on, and then turn the Mode dial to align the S while using indicator line.
- Select your ISO by pressing the i button for the lower-left portion from the back of the camera (when the camera’s info screen is not visible, press the Info button or i button).
- Press up or down on the Multi-selector to highlight the ISO option, then press OK.
- Press down on the Multi-selector to select the desired ISO setting, then press OK to lock inside the change.
- Point your camera at your subject, then activate your camera meter by depressing the shutter button halfway.
- View the exposure information inside the bottom area in the viewfinder or by going through the rear LCD panel.
- While the meter is activated, use your thumb to roll the Command dial left and right to see the changed exposure values. Roll the dial towards the right for faster shutter speeds and to the left for slower speeds.
Visit our Online Photography School Again for better understanding of photography. You will again fall in love with what you love doing.
Let us know what do you think about the article in comments section below. If you like the article then make a effort to share. Thanks
What Do You Wanna Read Next: